LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 2 Sport, 1.5 Z, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System MZR 1.5 >> Pcm Configuration
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pcm Configuration

  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Module Programming".
      2. Select "Programmable Module Installation".
      3. Select "PCM".
  3. Perform the configuration according to the directions on the screen.
  4. Retrieve DTCs by the M-MDS, then verify that there is no DTC present.
    • If a DTC (s) is detected, perform the applicable DTC inspection. (See DTC TABLE .)
scientia non olet · About LEMON Manuals