Clearing DTC [Immobilizer System (Advanced Keyless Entry And Push Button Start System)]

Connect the M-MDS to the DLC-2.
After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- When using the IDS (laptop PC)
  1. Select "Self Test".
  2. Select "Modules".
  3. Select "RKE".
- When using the PDS (Pocket PC)
  1. Select "Module Tests".
  2. Select "RKE".
  3. Select "Self Test".
Verify the DTC according to the directions on the screen.

Fig 1: Identifying DLC-2
Courtesy of MAZDA MOTORS CORP.
Press the clear button on the DTC screen to clear the DTC.
Switch the ignition to off.
Switch the ignition to ON and wait for 5 s or more.
Perform DTC inspection. (See DTC INSPECTION [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)] ).
Verify that no DTCs are displayed.