October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Barometric Pressure (BARO) Sensor Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition to ON.
- Verify that the voltage (M-MDS PID: BARO) within the specification. (See
PCM INSPECTION )
NOTE:
- Because the PCM is integrated in the BARO sensor, replacing the BARO sensor includes replacement of the PCM.
- If not as specified, replace the PCM. (See
PCM REMOVAL/INSTALLATION ).
Courtesy of MAZDA MOTORS CORP.