LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 3 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [L3 With TC] >> Camshaft Position (CMP) Sensor Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position (CMP) Sensor Removal/Installation

CAUTION:
  • When replacing the CMP sensor, make sure there is no foreign material on it such as metal shavings. If it is installed with foreign material, the sensor output signal will malfunction resulting from fluctuation in magnetic flux and cause a deterioration in engine control.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3 WITH TC] ).
  2. Disconnect the negative battery cable.
  3. Remove the charge air cooler cover. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION ).
  4. Disconnect the CMP sensor connector.
  5. Remove the CMP sensor.
  6. Install in the reverse order of removal.
    Fig 1: CMP Sensor With Torque Specifications
    G07868487Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals