October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

HO2S Heater Inspection

Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3 WITH TC] ).
Disconnect the negative battery cable.
Disconnect the HO2S connector.
Measure the HO2S resistance between terminals C and D.
- If not as specified, replace the HO2S.
  (See HEATED OXYGEN SENSOR (HO2S) REMOVAL/INSTALLATION ).
  
  HO2S heater resistance
  
  2-50 ohms [normal temperature]
  
  Fig 1: Identifying HO2S Connector Terminals
  Courtesy of MAZDA MOTORS CORP.