LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 3 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Front Seat Belt Removal/Installation [Two-Step Deployment Control System] >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Seat Belt Removal/Installation [Two-Step Deployment Control System]: Notes

WARNING:
  • Handling the front seat belt (pre-tensioner seat belt) improperly can accidentally deploy the pre-tensioner seat belt, which may seriously injure you. Read the air bag system service warnings and cautions before handling the front seat belt. (See AIR BAG SYSTEM SERVICE WARNINGS ). (See AIR BAG SYSTEM SERVICE CAUTIONS ).
WARNING:
  • The side air bag sensor is attached to the tower part of the B-pillar. When working around the B-pillar, disconnect the negative battery cable avoiding excessive impact to the lower part of the B-pillar.
CAUTION:
  • The ELR (emergency locking retractor) has a spring that will unwind if the retractor cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.