LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [L3 With TC] >> Manifold Absolute Pressure (Map) Sensor/Boost Air Temperature Sensor Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manifold Absolute Pressure (Map) Sensor/Boost Air Temperature Sensor Removal/Installation

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3 WITH TC] ).
  2. Disconnect the negative battery cable.
  3. Remove the oil level gauge pipe. (See OIL PAN REMOVAL/INSTALLATION ).
  4. Disconnect the MAP/boost air temperature sensor connector.
  5. Remove the MAP/boost air temperature sensor.
  6. Install in the reverse order of removal.
    Fig 1: MAP Sensor/Boost Air Temperature Sensor And Bolt With Torque Specifications
    G07868469Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals