DTC P2135:00: Notes
DTC DETECTING CONDITION REFERENCE CHART
| DTC P2135:00 |
TP sensor No. 1/No. 2 voltage correlation problem |
| DETECTION CONDITION |
- The PCM compares the input voltage from TP sensor No. 1 with the input voltage from TP sensor No. 2 when the engine is running. If the difference is more than the specification, the PCM determines that there is a TP sensor No. 1/No. 2 voltage correlation problem.
Diagnostic support note
- This is a continuous monitor (CCM).
- The MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA (Mode 2)/Snapshot data is available.
- The DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- Throttle body connector or terminal malfunction
- TP sensor No. 1 malfunction
- TP sensor No. 2 malfunction
- PCM connector or terminal malfunction
- PCM malfunction
|