April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P061B:00: Notes

DTC DETECTING CONDITION REFERENCE CHART

DTC P061B:00

Internal control module torque calculation performance problem

DETECTION CONDITION

Indicates that a calculation error occurred in the PCM.

Diagnostic support note

This is a continuous monitor (CCM).
The MIL illuminates if the PCM detects the above malfunction condition in the first drive cycle.
FREEZE FRAME DATA (Mode 2)/Snapshot data is available.
The DTC is stored in PCM memory.

POSSIBLE CAUSE

NOTE:

This DTC is an informational DTC and may be set in combination with a number of other DTCs which are causing the FMEM. Diagnose other DTCs first.

PCM connector or terminal malfunction
PCM malfunction