LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> CX-7 i SV, 2.5 M >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [L5] >> Crankshaft Position (CKP) Sensor Removal/Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position (CKP) Sensor Removal/Installation: Removal

  1. Disconnect the negative battery cable.
  2. Perform the following procedure for easier access.
    1. Remove the under cover.
    2. Remove the splash shield.
  3. Disconnect the CKP sensor connector.
  4. Remove the CKP sensor.
    Fig 1: Locating CKP Sensor And Bolts
    G06205253Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals