Continuity Inspection
- Disconnect the PSP switch connector. (See
POWER STEERING OIL PUMP DISASSEMBLY/ASSEMBLY
.)
Courtesy of MAZDA MOTORS CORP.
- Start the engine.
- Verify no continuity between the PSP switch terminals while rotating the steering wheel.
- If there is continuity, verify that the power steering oil pump is normal and replace the PSP switch. (See
POWER STEERING OIL PUMP DISASSEMBLY/ASSEMBLY
.)
- If the monitor item condition/specification (reference) is not within the specification, even though there is no malfunction, perform the "Circuit Open/Short Inspection".