Pcm Temperature Sensor Inspection

CAUTION:

The PCM temperature sensor cannot be removed as a single unit. When replacing the PCM temperature sensor, replace it together with the PCM as a single unit.

Connect the M-MDS to the DLC-2.
Turn the ignition switch to the ON position.
Select PCM_T on the M-MDS.
Verify that the PCM_T PID temperature is within the specification.
- If not as verified, replace the PCM. (See PCM REMOVAL/INSTALLATION .)
  PCM temperature sensor specification
- -30 -110°C {-22-230 °F}