Air Bag Control Module: Testing and Inspection

SAS CONTROL MODULE CONFIGURATION

1. Connect the M-MDS (IDS) to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
a. Select the "Module Programming".

b. Select "Programmable Module Installation".

c. Select menu in the "RCM".

3. Perform the configuration according to the directions on the screen.

4. Retrieve DTCs by the M-MDS, then verify that there is no DTC present.

5. If a DTC(s) is detected, perform the applicable DTC inspection. Standard Deployment Control System Two-Step Deployment Control System