LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 5 Sport, Automatic Trans >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Information Display Input/Output Check Mode >> Check Code Inspection >> Check code 09
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Check code 09

Inspection item Step Inspection condition Display Action
Clock switch input signal 1 H switch is pressed
G08153597
 The input signal is normal.
Go to the next step.
G08153598
 Go to the next step.
H switch is released
G08153599
 Go to Step 4.
G08153600
 The input signal to the information display is normal.
Go to Step 2.
2 M switch is pressed
G08153601
 The input signal is normal.
Go to the next step.
G08153602
 Go to the next step.
M switch is not released
G08153603
 Go to Step 5.
G08153604
 The input signal to the information display is normal.
Go to Step 3.
Clock switch input signal 3 :00 switch is pressed
G08153605
 The input signal is normal.
Go to the next step.
G08153606
 Go to the next step.
:00 switch is released
G08153607
 Go to Step 6.
G08153608
 The input signal to the information display is normal.
4 Inspect the clock switch. 
  • Verify the resistance between H switch terminals.

    (See CLOCK SWITCH INSPECTION .)

  • Can the resistance be measured?
 Yes
  • Replace the information display.
No
  • Inspect for an open or short circuit in the clock switch related wiring harness, poor connection or terminal disconnection of the connector.
  • If there is any malfunction, repair or replace the malfunctioning location.
Clock switch input signal 5 Inspect the clock switch. 
  • Verify the resistance between M switch terminals.

    (See CLOCK SWITCH INSPECTION .)

  • Can the resistance be measured?
 Yes
  • Replace the information display.
No
  • Inspect for an open or short circuit in the clock switch related wiring harness, poor connection or terminal disconnection of the connector.
  • If there is any malfunction, repair or replace the malfunctioning location.
6 Inspect the clock switch. 
  • Verify the resistance between: 00 switch terminals.

    (See CLOCK SWITCH INSPECTION .)

  • Can the resistance be measured?
 Yes
  • Replace the information display.
No
  • Inspect for an open or short circuit in the clock switch related wiring harness, poor connection or terminal disconnection of the connector.
  • If there is any malfunction, repair or replace the malfunctioning location.
scientia non olet · About LEMON Manuals