DTC B1013 [Two-Step Deployment Control System]: Notes

DTC B1013	Seat weight sensor calibration error
DETECTION CONDITION	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. Calibration set value not within valid range
FAIL-SAFE FUNCTION	-
POSSIBLE CAUSE	Seat weight sensor deformed or malfunction Load to or deformation of the seat belt rail Deformed front passenger-side seat under-bracket or frame Weight acting on front passenger-side seat during calibration Improperly installed front passenger-side seat part at time of calibration Deformed floor where attached to front passenger-side seat Seat weight sensor control module malfunction SAS control module malfunction
SYSTEM WIRING DIAGRAM	-