LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 5 Touring >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> On-Board Diagnostic [Air Bag System - Two-Step Deployment Control System) >> PID/Data Monitor Table [Two-Step Deployment Control System]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PID/Data Monitor Table [Two-Step Deployment Control System]

PID name (definition) Unit/Operation Operation Status (Reference) Inspection item(s)
BUCKLE_D
(Driver-side buckle switch status)
Unbuckled/
Buckled
  • Driver-side front seat belt fastened (Driver-side buckle switch off): Buckled
  • Driver-side front seat belt not fastened (Driver-side buckle switch on): Unbuckled
Driver-side buckle switch
BUCKLE_P
(Passenger-side buckle switch status)
Unbuckled/
Buckled
  • Passenger-side front seat belt fastened (Passenger-side buckle switch off): Buckled
  • Passenger-side front seat belt not fastened (Passenger-side buckle switch on): Unbuckled
Passenger-side buckle switch
CCNT_RCM
(Number of continuous DTCs)
-
  • DTCs detected: 1-255
  • No DTCs detected: 0
SAS control module
IGN_V
(IG1 voltage)
V Switch the ignition to ON: B+ SAS control module
OCSFLT_CAL
(Seat weight sensor calibration status)
OK/
FAULT
  • Sensor normal: OK
  • Passenger sensing system error: FAULT
Seat weight sensor control module
OCSFLT_COM
(Seat weight sensor control module communication status)
OK/
FAULT
  • Sensor normal: OK
  • Passenger sensing system communication error: FAULT
Seat weight sensor control module
OCSFLT_L
(Seat weight sensor (LH) malfunction status)
OK/
FAULT
  • Sensor normal: OK
  • Passenger sensing system (LH) malfunction: FAULT
Seat weight sensor
OCSFLT_MDL
(Seat weight sensor control module malfunction status)
OK/
FAULT
  • Sensor normal: OK
  • Passenger sensing system control module malfunction: FAULT
Seat weight sensor control module
OCSFLT_R
(Seat weight sensor (RH) malfunction status)
OK/
FAULT
  • Sensor normal: OK
  • Passenger sensing system (RH) malfunction: FAULT
Seat weight sensor
PS_WEIGHT
(Seat weight sensor measured weight of passenger)
kg Display of load (body weight) on passenger-side seat Seat weight sensor control module
PSAB_DepSt
(Passenger-side air bag module deployment status)
Inactive/
Active
  • Passenger-side air bag module non-operation (non-deployment) status: Inactive
  • Passenger-side air bag module operation (deployment) enabled status: Active
Passenger-side pre-tensioner seat belt
RES_AB_D
(Driver-side air bag module (inflator No.1) resistance nominal)
ohm Continuous: 1.61-5.77 ohms Driver-side air bag module
RES_AB_P
(Passenger-side air bag module (inflator No.1) resistance nominal)
ohm Continuous: 1.10-5.77 ohms Passenger-side air bag module
RES_AB2_D
(Driver-side air bag module (inflator No.2) resistance nominal)
ohm Continuous: 1.61-5.77 ohms Driver-side air bag module
RES_AB2_P
(Passenger-side air bag module (inflator No.2) resistance nominal)
ohm Continuous: 1.10-5.77 ohms Passenger-side air bag module
RES_CAB_D
(Driver-side curtain air bag module resistance nominal)
ohm Continuous: 1.10-9.64 ohms Driver-side curtain air bag module
RES_CAB_P
(Passenger-side curtain air bag module resistance nominal)
ohm Continuous: 1.10-9.64 ohms Passenger-side curtain air bag module
RES_PT_D
(Driver-side pre-tensioner seat belt resistance nominal)
ohm Continuous: 1.10-5.77 ohms Driver-side pre-tensioner seat belt
RES_PT_P
(Passenger-side pre-tensioner seat belt resistance nominal)
ohm Continuous: 1.10-5.77 ohms Passenger-side pre-tensioner seat belt
RES_SAB_D
(Driver-side side air bag module resistance nominal)
ohm Continuous: 1.10-9.64 ohms Driver-side side air bag module
RES_SAB_P
(Passenger-side side air bag module resistance nominal)
ohm Continuous: 1.10-9.64 ohms Passenger-side side air bag module
TRAK_SW
(Seat track position sensor state)
Forward/Rearward
  • Front seat front position: Forward
  • Front seat rear position: Rearward
Seat track position sensor