LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 6 V6-3.7L >> Repair and Diagnosis >> Windows and Glass >> Windows >> Power Window Switch >> Testing and Inspection >> Power Window Subswitch Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Power Window Subswitch Inspection





POWER WINDOW SUBSWITCH INSPECTION

Passenger-side

With auto-open/close function

1. Disconnect the negative battery cable.

2. Remove the inner garnish. Inner Garnish Removal/Installation

3. Remove the front door trim. Front Door Trim Removal/Installation

4. Connect the negative battery cable.

5. Measure the voltage at each terminal.

- If the voltage is not as specified in the Terminal Voltage Table, inspect the parts under "Inspection item(s)" and related wiring harnesses.





- If the system does not work properly even though the inspection items or related wiring harnesses do not have any malfunction, replace the power window subswitch. Power Window Subswitch Removal/Installation





Without auto-open/close function

1. Disconnect the negative battery cable.

2. Remove the inner garnish. Inner Garnish Removal/Installation

3. Remove the front door trim. Front Door Trim Removal/Installation

4. Verify that the continuity is as indicated in the table using a tester.






- If not as indicated in the table, replace the power window subswitch. Power Window Subswitch Removal/Installation






Rear

1. Disconnect the negative battery cable.

2. Remove the rear door trim. Rear Door Trim Removal/Installation

3. Verify that the continuity is as indicated in the table using a tester.






- If not as indicated in the table, replace the power window subswitch. Power Window Subswitch Removal/Installation






scientia non olet · About LEMON Manuals