LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 6 i Sport, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting [Engine Control System - MZR 2.5] >> Engine Control System Operation Inspection >> Drive-by-Wire Control System Inspection >> Throttle position (TP) sweep inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle position (TP) sweep inspection

  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition to ON.
  3. Verify that none of the following DTC are displayed: (See ON-BOARD DIAGNOSTIC TEST .)
    • P0122:00, P0123:00, P0222:00, P0223:00, P0638:00, P2100:00, P2101:00, P2107:00, P2108:00, P2119:00, P2122:00, P2123:00, P2127:00, P2128:00, P2135:00, P2138:00
      • If any one DTC is displayed, perform DTC inspection. (See DTC TABLE .)
  4. Access the PCM PIDs APP1 and APP2 using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST .)
  5. Verify the APP1 and APP2 PIDs when the accelerator pedal released and depresses.