LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 6 i Touring Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 618 (Dynamic Stability Control System) >> DSC Off Switch Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DSC Off Switch Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the following parts.
    1. Front scuff plate (driver-side). See FRONT SCUFF PLATE REMOVAL/INSTALLATION .
    2. Front side trim (driver-side). See FRONT SIDE TRIM REMOVAL/INSTALLATION .
    3. Upper panel. See UPPER PANEL REMOVAL/INSTALLATION .
    4. Decoration panel (driver-side). See DECORATION PANEL REMOVAL/INSTALLATION .
    5. Hood release lever. See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .
    6. Meter hood. See METER HOOD REMOVAL/INSTALLATION .
    7. Lower panel (driver-side). See LOWER PANEL REMOVAL/INSTALLATION .
  2. Press the tabs.
  3. Remove the DSC OFF switch
  4. Install in the reverse order of removal.
    Fig 1: Identifying DSC OFF Switch Removal/Installation
    G06205595Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals