LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Antilock Brake System And Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> Brake Pipe Removal Note
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Brake Pipe Removal Note

  1. Place an alignment mark on the brake pipe and DSC HU/CM.
    Fig 1: Identifying Alignment Mark On Brake Pipe And DSC HU/CM
    G08142546
  2. Affix protective tape to the connector to prevent brake fluid from entering.
  3. Remove the brake pipe.
  4. Adhere protective tape to the installation area of the DSC HU/CM brake pipe to prevent foreign material penetration.
scientia non olet · About LEMON Manuals