LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Instrumentation/Driver Info >> Information Display Input/Output Check Mode >> Check Code Inspection >> Check code 06
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check code 06

Check code 06 Ignition switch ON/OFF signal
STEP INSPECTION CONDITION DISPLAY ACTION
TYPE A TYPE B
1 Switch the ignition to ON.
G08145110
G08145111
 Go to the next step.
G08145112
G08145113
 Verify that the voltage of information display terminal E is B+  .
  • If the voltage is as specified, replace the information display.
  • If the voltage is not as specified, inspect the following parts:
    • Ignition switch(1)
    • Push button start(2)
    • Wiring harness (Battery-ignition switch(1)-information display)
    • Wiring harness (Battery-push button start(2)-information display)
2 Switch the ignition to off.
G08145114
G08145115
 Verify that the voltage of the information display terminal E is 1.0 V or less  .
  • If the voltage is as specified, replace the information display.
  • If the voltage is not as specified, inspect the following parts:
    • Ignition switch(1)
    • Push button start(2)
    • Wiring harness (Battery-ignition switch(1)-information display)
    • Wiring harness (Battery-push button start(2)-information display)
G08145116
G08145117
 Input signal to the information display is normal.
(1) Without advanced keyless entry and push button start system 
(2) With advanced keyless entry and push button start system 
scientia non olet · About LEMON Manuals