Keyless Control Module Removal/Installation [Advanced Keyless Entry And Push Button Start System]
- If the keyless control module is replaced, always perform the following procedure.
- Vehicles with immobilizer system
- Keyless Control Module Configuration (See KEYLESS CONTROL MODULE CONFIGURATION [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM] .)
- Immobilizer System-related Parts Programming [No.4 Programming Procedure Due to Keyless Control Module Replacement] (See IMMOBILIZER SYSTEM-RELATED PARTS PROGRAMMING [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM] .)
- Vehicles without immobilizer system
- Keyless Control Module Configuration (See KEYLESS CONTROL MODULE CONFIGURATION [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM] .)
- Advanced Key Id Code Registration (See ADVANCED KEY ID CODE REGISTRATION [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM] .)
- Steering Lock Unit Id Code Registration (See STEERING LOCK UNIT ID CODE REGISTRATION [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM] .)
- Vehicles with immobilizer system
- Disconnect the negative battery cable.
- Remove the front scuff plate. (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
- Remove the front side trim. (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
- Remove in the order indicated in the table.
- Install in the reverse order of removal.