LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2013 >> 2 Touring, 1.5L Eng VIN Y, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [MZR 1.5] >> Neutral Switch Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Neutral Switch Inspection

  1. Disconnect the negative battery cable.
  2. Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION ).
  3. Inspect for continuity between the neutral switch terminals using an ohmmeter.
    CONTINUITY REFERENCE

    Measured condition Continuity
    Rod pushed Continuity detected
    Except above No continuity
    Fig 1: Checking Continuity Between Neutral Switch Terminals Using Ohmmeter
    G09130325
scientia non olet · About LEMON Manuals