LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2013 >> 3 Mazdaspeed, 2.3L Eng VIN 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Engine Control System [SKYACTIV-G 2.0]) >> Fuel Pressure Sensor Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Fuel Pressure Sensor Removal/Installation

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • The fuel pressure sensor cannot be removed as a single unit. When replacing the fuel pressure sensor, replace it together with the fuel distributor as a single unit.
  1. Remove the fuel distributor. (See FUEL INJECTOR REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals