DTC P061B:00: Notes

DTC P061B:00	Internal control module torque calculation performance problem
DETECTION CONDITION	Indicates that a calculation error occurred in the PCM. Diagnostic support note This is a continuous monitor (CCM). The MIL illuminates if the PCM detects the above malfunction condition in the first drive cycle. FREEZE FRAME DATA (Mode 2)/Snapshot data is available. The DTC is stored in PCM memory.
POSSIBLE CAUSE	NOTE: This DTC is an informational DTC and may be set in combination with a number of other DTCs which are causing the FMEM. Diagnose other DTCs first. PCM connector or terminal malfunction PCM malfunction