| DTC P2108:00 |
Throttle valve actuator control module performance error |
| DETECTION CONDITION |
- If the PCM detects either of the following conditions, the PCM determines that throttle valve actuator control system has a malfunction.
- TP sensor power supply voltage below 4.4 V
- TP sensor No.1 output voltage below 0.2 V
or above 4.85 V
(DTC P0122:00 or P0123:00)
- PCM internal circuit for TP sensor No.1 input circuit malfunction
Diagnostic support note
- This is a continuous monitor (CCM).
- The MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA (Mode 2)/Snapshot data is available.
- The DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- Throttle body connector or terminal malfunction
- PCM connector or terminal malfunction
- TP sensor No.1 malfunction
- TP sensor No.2 malfunction
- PCM malfunction
|