| DTC P2110:00 |
Throttle valve actuator control system-forced limited RPM |
| DETECTION CONDITION |
- The throttle valve actuator control system is in the failure mode effects management mode.
Diagnostic support note
- This is a continuous monitor (CCM).
- The MIL illuminates if the PCM detects the above malfunction condition in the first drive cycle.
- FREEZE FRAME DATA (Mode 2)/Snapshot data is available.
- The DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- Throttle valve actuator control module internal processor malfunction
- APP sensor malfunction
- PCM malfunction
|