September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Knock Sensor (KS) Removal/Installation
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the intake manifold bracket.
- Remove the KS using the SST
(49 H018 001).
- Install in the reverse order of removal.
Tightening torque
- 19.6-34.3 N.m {2.0-3.5 kgf.m, 14.5-25.3 ft.lbf}
Courtesy of MAZDA MOTORS CORP.