| DTC P2299:00 |
Accelerator pedal: spring back malfunction |
| DETECTION CONDITION |
- Brake override system operates.
Diagnostic support note
- This is a continuous monitor (other).
- The MIL does not illuminate.
- FREEZE FRAME DATA (Mode 2) is not available.
- Snapshot data is available.
- The DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- Accelerator pedal sticking
- APP sensor signal malfunction
- APP sensor malfunction
- Related connector or terminals malfunction
- Related wiring harness malfunction
- Brake switch signal malfunction
- Brake switch malfunction
- Related connector or terminals malfunction
- Related wiring harness malfunction
- Brake pedal malfunction (increase in play due to joint pin wear)
- Driver depresses accelerator and brake pedals simultaneously (during braking operation using left foot)
- Accelerator pedal is pressed in due to object such as floor mat
- PCM malfunction
|