LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2013 >> 6 i Touring >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting [Engine Control System MZR 2.5] >> Engine Control System Operation Inspection >> Variable Valve Timing Control System Operation Inspection >> When idling can be continued
April 5, 2026: LEMON Manuals is launched! Read the announcement.

When idling can be continued

  1. Disconnect OCV connector.
  2. Warm up the engine and idle it.
  3. Apply battery voltage to the OCV and verify that the engine idles roughly or stalls.
    • If the engine idles roughly or stalls, inspect the timing chain component (valve timing deviation).
    • If the engine does not idle roughly or stalls, go to the next step.
  4. Remove the OCV and perform spool valve operation inspection. (See OIL CONTROL VALVE (OCV) INSPECTION .)
    • If not as specified, inspect the following:
    • If as specified, inspect the following hydraulic passages for clogging or leakage or both:
      • Oil pressure switch-OCV
      • OCV-Camshaft
      • Camshaft internal passage
  5. If they are normal, replace the camshaft pulley (with built-in variable valve timing actuator).
scientia non olet · About LEMON Manuals