Engine Oil Solenoid Valve Control System Inspection
- Connect the M-MDS to the DLC-2.
- Perform the KOER self test. (See KOEO/KOER SELF TEST [SKYACTIV-G 2.0] ).
- Verify that DTC P06DA:00 is not displayed. (See
ON-BOARD DIAGNOSTIC TEST [SKYACTIV-G 2.0]
).
- If DTC P06DA:00 is displayed, perform the DTC inspection. (See DTC P06DA:00 [SKYACTIV-G 2.0] ).
- Inspect the engine oil pressure. (See
OIL PRESSURE INSPECTION
).
- If the engine oil pressure is not as specified, repair or replace the malfunctioning part according to the inspection results:
- Access the following PCM PIDs using the M-MDS. (See
ON-BOARD DIAGNOSTIC TEST [SKYACTIV-G 2.0]
).
- OIL_P_SOL
- RPM
- ECT
- With the engine coolant temperature at 98°C
, increase the engine speed to 4,000 rpm or higher
, and verify that the oil pressure gauge value changes when the data monitor item OIL_P_SOL value is changed from ON to OFF.
- If the oil pressure gauge value change cannot be verified, inspect the engine oil solenoid valve. (Perform the Engine Oil Solenoid Valve Operation Inspection).
RELATED PIDs DESCRIPTION
| Monitor item (Definition) | Unit/Condition | Condition/Specification (Reference) |
|---|---|---|
| OIL_P_SOL | OFF/ON |
|
| RPM | RPM |
|
| ECT 1 | °C, °F |
|
| V |
|