Advanced keyless entry system
NOTE:
- There are two types of personalization procedures: one using the M-MDS and the other using the center display.
| Personalization features | Setting contents | Setting procedure |
|---|---|---|
| The advanced keyless entry system and push button start system functions can be disabled, | Enabled./Disabled. | M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE .) |
| The out-of-area (reception area) type auto lock function can be set. | Not Adopted./OFF/ON | M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE .) |
| Off/On | Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE .) |
|
| The operation start time of the auto re-lock function can be changed. | Not Adopted./30 seconds/60 seconds/90 seconds | M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE .) |
| 30 seconds/60 seconds/90 seconds | Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE .) |
|
| The keyless beeper volume can be adjusted. | Not Adopted./Off/Low/Medium/High | M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE .) |
| High/Medium/Low/Off | Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE .) |
|
| Returns the setting content of the door lock system to the initial setting. | No/Yes | Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE .) |