DTC C0061 28/C0061 64/C0062 28/C0062 64/C0063 28/C0063 64: SAS Control Module System: Notes
DTC C0061 28/C0061 64/C0062 28/C0062 64/C0063 28/C0063 64 DETECTION CONDITIONS AND POSSIBLE CAUSES (DYNAMIC STABILITY CONTROL)
| DTC |
C0061:28, C0061:64, C0062:28, C0062:64, C0063:28, C0063:64 |
SAS control module system |
| DETECTION CONDITION |
NOTE:
- The low-G sensor and the yaw rate sensor are built into the SAS control module.
- C0061:28, C0061:64
- Out-of-specification signal modulation or lateral-G value is detected from the low-G sensor.
- C0062:28, C0062:64
- Out-of-specification signal modulation or longitudinal-G value is detected from the low-G sensor.
- C0063:28, C0063:64
- Out-of-specification signal modulation or yaw rate value is detected from the yaw rate sensor.
|
| FAIL-SAFE FUNCTION |
- C0061:28, C0061:64, C0063:28, C0063:64
- Illuminates the TCS/DSC indicator light and smart city brake support (SCBS) indicator light (amber)*1
.
- Tire pressure monitoring system warning light*1
illuminates after flashes.
- Inhibits the TCS, DSC, TPMS*1
, and smart city brake support (SCBS)*1
controls.
- C0062:28, C0062:64
- Illuminates the TCS/DSC indicator light.
- Inhibits the hill launch assist (HLA) control.
*1
: If equipped. |
| POSSIBLE CAUSE |
- SAS control module malfunction
- DSC HU/CM malfunction
- Poor connection at connectors (female terminal)
|
| SYSTEM WIRING DIAGRAM |
Not applicable |