LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> Rear Axle Wheel Hubs >> Wheel Hub Component Removal/Installation >> Hub Support Bushing (Front) Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Hub Support Bushing (Front) Installation Note

  1. Align the projection of the bushing with the hub support marking and set a new bushing to the hub support.
    Fig 1: Identifying Hub Support Bushing Mark (Front)
    G09782949Courtesy of MAZDA MOTORS CORP.
  2. Install a new hub support bushing (front) using the SSTs  .
    Fig 2: Installing Hub Support Bushing (Front) Using SST
    G09782950Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals