LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> On-Board Diagnostic - Engine Controls (2 Of 6) >> DTC P0131 00: A/F Sensor Circuit Low Input >> Function Inspection Using M-MDS
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Function Inspection Using M-MDS

STEP INSPECTION RESULTS ACTION
1 PURPOSE: VERIFY RELATED REPAIR INFORMATION AVAILABILITY 
  • Verify related Service Bulletins and/or on-line repair information availability.
  • Is any related repair information available?
Yes Perform repair or diagnosis according to the available repair information.
  • If the vehicle is not repaired, go to the next step.
No Go to the next step.
2 PURPOSE: RECORD VEHICLE STATUS AT TIME OF DTC DETECTION TO UTILIZE WITH REPEATABILITY VERIFICATION 
  • Has the FREEZE FRAME DATA (Mode 2)/snapshot data been recorded?
Yes Go to the TROUBLESHOOTING PROCEDURE to perform the procedure from Step 1.
No Record the FREEZE FRAME DATA (Mode 2)/snapshot data on the repair order.
NOTE:
  • Recording can be facilitated using the screen capture function of the PC.

Go to the TROUBLESHOOTING PROCEDURE to perform the procedure from Step 1.