DTC P0601 00: Pcm Memory Check Sum Error: Notes
DTC P0601 00 DETECTION CONDITIONS AND POSSIBLE CAUSES (SKYACTIV-G 2.0, SKYACTIV-G 2.5)
| DTC P0601:00 |
PCM memory check sum error |
| DETECTION CONDITION |
- PCM internal memory check sum error.
Diagnostic support note
- This is a continuous monitor (CCM).
- The check engine light illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA (Mode 2)/Snapshot data is available.
- DTC is stored in the PCM memory.
|
| FAIL-SAFE FUNCTION |
- Restricts the upper limit of the engine speed.
- Stops the drive-by-wire control (throttle valve is open at approx. 8
° by return spring force).
|
| POSSIBLE CAUSE |
- PCM connector or terminals malfunction
- PCM malfunction
- PCM internal memory malfunction
|
| SYSTEM WIRING DIAGRAM |
Not applicable |