LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Air Bag System [Standard Deployment Control System] >> Air Bag Module And Pre-TENSIONER Seat Belt Deployment Procedures [Standard Deployment Control System] >> Deployment Procedure for Inside of Vehicle >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Deployment Procedure for Inside of Vehicle: Notes

  1. Inspect the SST (Deployment tool)  . (See INSPECTION OF SST (DEPLOYMENT TOOL) [STANDARD DEPLOYMENT CONTROL SYSTEM] .)
  2. Move the vehicle to an open space, away from strong winds, and close all of the vehicle doors and windows.
  3. Switch the ignition off.
  4. Disconnect the negative battery cable and wait for 1 min or more.  (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  5. Follow the procedure below for operating (deploying) the applicable air bag module or pre-tensioner seat belt.
    NOTE:
    • The connector part of the air bag module and the SST (adapter wiring harness) burns out from the high heat when the inflator is operated (deployed).
scientia non olet · About LEMON Manuals