SAS Control Module Connector Cover Removal/Installation [Two-Step Deployment Control System]: Notes
WARNING:
- Handling the SAS control module or air bag module improperly can accidentally deploy the air bag modules, pre-tensioner seat belts and lap pre-tensioner seat belts which may seriously injure you. Read the air bag system service warnings and cautions before handling the air bag module. (See AIR BAG SYSTEM SERVICE WARNINGS [TWO-STEP DEPLOYMENT CONTROL SYSTEM] .) (See AIR BAG SYSTEM SERVICE CAUTIONS [TWO-STEP DEPLOYMENT CONTROL SYSTEM] .)
- If the connector is connected and the ignition switch is turned to the ON position with the SAS control module not secured completely using the installation nuts, the SAS control module may detect a degree of impact even when something contacts it lightly, deploying the air bag module, pre-tensioner seat belt and lap pre-tensioner seat belt accidentally.
- If the DSC related parts sensor initialization procedure is not completed, it could result in an unexpected accident due to the DSC being inoperative. Therefore, after the SAS control module is replaced, always perform the DSC related parts sensor initialization procedure to ensure proper DSC operation.