DTC B0001 55/B0010 55: Configuration Setting Error (Driver/Passenger-Side Air Bag Module (Inflator No. 1): Notes
DTC B0001 55/B0010 55 - DETECTION CONDITIONS AND POSSIBLE CAUSES (TWO-STEP DEPLOYMENT CONTROL SYSTEM)
| System malfunction location |
- B0001:55: Configuration setting error (driver-side air bag module (inflator No. 1) structural malfunction)
- B0010:55: Configuration setting error (passenger-side air bag module (inflator No. 1) structural malfunction)
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- SAS control module configuration setting has not been done correctly
- Parts which have not been set to SAS control module are assembled
|
| Fail-safe function |
Not applicable |
| Possible cause |
- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- Driver or passenger-side air bag module assembly incorrect
- SAS control module malfunction
|
| System wiring diagram |
Not applicable |