DTC B0094 55/B1417 55: Configuration Setting Error (Driver/PASSNEGER-Side Crash Zone Sensor): Notes
DTC B0094 55/B1417 55 - DETECTION CONDITIONS AND POSSIBLE CAUSES (TWO-STEP DEPLOYMENT CONTROL SYSTEM)
| System malfunction location |
- B0094:55: Configuration setting error (driver-side crash zone sensor structural malfunction)
- B1417:55: Configuration setting error (passenger-side crash zone sensor structural malfunction)
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- SAS control module configuration setting has not been done correctly
- Parts which have not been set to SAS control module are assembled
|
| Fail-safe function |
Not applicable |
| Possible cause |
- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- Driver or passenger-side crash zone sensor assembly incorrect
- SAS control module malfunction
|
| System wiring diagram |
Not applicable |