DTC B00A0 81/B00A0 87/B00A0 8F: SAS Control Module/Seat Weight Sensor Control Module/Seat Weight Sensor: Notes

DTC B00A0 81/B00A0 87/B00A0 8F - DETECTION CONDITIONS AND POSSIBLE CAUSES (TWO-STEP DEPLOYMENT CONTROL SYSTEM)

System malfunction location	B00A0:81: Invalid signal to SAS control module  B00A0:87: Error signal from seat weight sensor control module  B00A0:8F: Seat weight sensor communication error
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. Error signal is detected between SAS control module and seat weight sensor control module
Fail-safe function	Not applicable
Possible cause	Seat weight sensor connector malfunction Short circuit to power supply or body ground in the wiring harness between the SAS control module and seat weight sensor control module Open circuit in the wiring harness between the SAS control module and seat weight sensor control module Seat weight sensor control module malfunction SAS control module malfunction