EPS Control Module Inspection: Notes
- Remove the upper panel. (See UPPER PANEL REMOVAL .) (See UPPER PANEL INSTALLATION .)
- Remove the rear console. (See REAR CONSOLE REMOVAL/INSTALLATION .)
- Remove the shift lever knob (MTX). (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [C66M-R] .)
- Remove the selector lever knob (ATX). (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
- Remove the shift panel. (See SHIFT PANEL REMOVAL/INSTALLATION .)
- Remove the front console box. (See FRONT CONSOLE BOX REMOVAL/INSTALLATION .)
- Remove the CD player (with CD player). (See CD PLAYER REMOVAL .) (See CD PLAYER INSTALLATION .)
- Remove the side wall. (See SIDE WALL REMOVAL/INSTALLATION .)
- Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
- Remove the decoration panel. (See DECORATION PANEL REMOVAL/INSTALLATION .)
- Remove the front console. (See FRONT CONSOLE REMOVAL/INSTALLATION .)
- Remove the driver-side front scuff plate. (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
- Remove the driver-side front side trim. (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
- Remove the hood release lever. (See HOOD RELEASE LEVER AND RELEASE CABLE REMOVAL/INSTALLATION .)
- Remove the fuel-filler lid opener lever. (See FUEL-FILLER LID OPENER AND LEVER REMOVAL/INSTALLATION .)
- Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION .)
- Attach the tester lead to the underside of the EPS CM connector and inspect the voltage according to the terminal voltage table (reference).