DTC P0218: 00 Automatic Transaxle Protection Control: Notes
DTC P0218:00 DETECTION CONDITIONS AND POSSIBLE CAUSES (FW6A-EL)
| DTC P0218:00 |
Automatic transaxle protection control |
| DETECTION CONDITION |
- Under the following conditions, the ATF temperature is 135 °C {275 °F} or more
for 10 s:
- Engine is running.
- TFT sensor related DTC is not recorded.
Diagnostic support note
- The check engine light illuminates if the TCM detects the above malfunction condition during the first drive cycle.
- The automatic transaxle warning light illuminates if the TCM detects the above malfunction condition during the first drive cycle.
- PENDING CODE is available.
- FREEZE FRAME DATA is available.
- DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
- Inhibits learning control.
- Inhibits manual mode.
- Inhibits neutral idle control.
- Inhibits AAS.
|
| POSSIBLE CAUSE |
- Oil cooler malfunction
- ATF is more than specified value
|
| SYSTEM WIRING DIAGRAM |
Not applicable |