DTC P0707: 00 Transaxle Range Sensor Circuit Low Input: Notes
DTC P0707:00 DETECTION CONDITIONS AND POSSIBLE CAUSES (FW6A-EL)
| DTC P0707:00 |
Transaxle range sensor circuit low input |
| DETECTION CONDITION |
- Under the following condition, incorrect voltage in any one of transaxle range sensors 1 to 4:
- Battery voltage is 8 V or more.
Diagnostic support note
- The check engine light illuminates if the TCM detects the above malfunction condition during the first drive cycle.
- The automatic transaxle warning light illuminates if the TCM detects the above malfunction condition during the first drive cycle.
- PENDING CODE is available.
- FREEZE FRAME DATA is available.
- DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
- Inhibits learning control.
- Inhibits manual mode.
- Inhibits neutral idle control.
- Inhibits AAS.
|
| POSSIBLE CAUSE |
- Transaxle range sensor (built-into TCM) malfunction
|
| SYSTEM WIRING DIAGRAM |
Not applicable |