LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System [Standard Deployment Control System] >> Crash Zone Sensor Removal/Installation [Standard Deployment Control System] >> Connector Disconnect Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Connector Disconnect Note

  1. Press the area (1) indicated by the arrow and slide it as shown in the figure (2).
    Fig 1: Disconnecting Crash Zone Sensor And Connector
    G09076067Courtesy of MAZDA MOTORS CORP.
  2. Lift up the location shown in the figure using a tape-wrapped flathead screwdriver (3) and disconnect the connector (4).
scientia non olet · About LEMON Manuals