DTC P0610 00: Pcm Vehicle Configuration Error: Notes

DTC P0610 00 DETECTION CONDITIONS AND POSSIBLE CAUSES (SKYACTIV-G 2.0, SKYACTIV-G 2.5)

DTC P0610:00	PCM vehicle configuration error
DETECTION CONDITION	PCM data configuration error. Diagnostic support note This is a continuous monitor (CCM). The check engine light illuminates if the PCM detects the above malfunction condition during the first drive cycle. FREEZE FRAME DATA (Mode 2)/Snapshot data is available. DTC is stored in the PCM memory.
FAIL-SAFE FUNCTION	Not applicable
POSSIBLE CAUSE	Configuration procedure has not been completed PCM connector or terminals malfunction PCM malfunction
SYSTEM WIRING DIAGRAM	Not applicable