LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> 3 SV, Standard Trans >> Repair and Diagnosis (Single Page) >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems - Indirect TPMS >> TPMS Reset Procedures >> Tire Pressure Monitoring System Initialization >> Using M-MDS
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using M-MDS

  1. Adjust all four tire pressures to specification.
  2. Connect the M-MDS to DLC-2.
  3. After the vehicle is identified, select the following items from the initial screen of the M-MDS: Chassis / ABS/DSC / TPMS Reset.
  4. When the tire pressure monitoring system initialization is performed, LEARNING initiates. Learning is completed by driving the vehicle for approx. 20 min.
NOTE: TPMS is inoperative during learning phase.
scientia non olet · About LEMON Manuals