Selection of Procedure for Immobilizer System-Related Parts Programming
WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the ROOM fuse, and AT fuse are installed.
- Select the applicable programming procedure from the service content of the immobilizer system-related parts.
IMMOBILIZER SYSTEM-RELATED PARTS SERVICE AND PROGRAMMING PROCEDURE
| No. | Service | Programming procedure | |
|---|---|---|---|
| 1 | Additional remote transmitter programming | Have remote transmitter that can start engine | (See NO.1 ADDITIONAL REMOTE TRANSMITTER PROGRAMMING PROCEDURE (USING THE M-MDS) ). |
| 2 | Programming due to PCM replacement | (See NO.2 PROGRAMMING PROCEDURE AFTER PCM REPLACEMENT ). | |
| 3 | Start stop unit replacement and programming due to simultaneous replacement of start stop unit/PCM | (See NO.3 START STOP UNIT REPLACEMENT AND PROGRAMMING PROCEDURE DUE TO SIMULTANEOUS REPLACEMENT OF START STOP UNIT/PCM ). | |
| 4 | Remote transmitter replacement or clearing | (See NO.4 REMOTE TRANSMITTER REPLACEMENT OR REMOTE TRANSMITTER CLEARING ). | |