Keyless Receiver Removal/Installation

WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
Remove the following parts:
1. Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION ).
2. Trunk side trim (LH) (See TRUNK SIDE TRIM REMOVAL/INSTALLATION ).
Disconnect the connector.
Remove the bolts.
Remove the keyless receiver.
Install in the reverse order of removal.

Fig 1: Keyless Receiver, Connector And Bolt With Torque Specifications