Continuity Inspection
WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
- Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION ).
- Inspect for continuity between neutral switch No.1 terminal A and B.
- If not as specified, replace the neutral switch No.1. (See NEUTRAL SWITCH REMOVAL/INSTALLATION ).
NEUTRAL SWITCH CONTINUITY SPECIFICATION
| Measured condition | Continuity |
|---|---|
| Rod pushed | Continuity detected |
| Rod not pushed | No continuity |